技术应用
工业扫查器首页 > 新闻专题 > 集团新闻
  • 跟贴排行
  • 点击排行
    • 腐蚀成像解决方案
    • VersaMouse扫查器
    • Wing(翼形)扫查...
    • GLIDER(滑动)扫...
    • Chain(链式)扫...
    • HSMT-X03扫查器
    • HSMT-Flex 扫查器
    • HSMT-Compact(紧...
即时新闻
  • 精彩图片
  • 热门推荐
  • 产品展示
HSMT-Flex 扫查器
发布时间:2015-05-29



HSMT-Flex扫查器

HSMT-Flex扫查器用于对外径等于或大于4.5英寸的管材的周向焊缝进行手动单轴编码检测。由于这款扫查器可在中间弯曲,因此可以通过使用可选探头架,最多装配8个探头。


概览:

The HSMT-Flex™ is intended for one axis encoded inspection of circumference welds on pipes of 4.5 in. OD (114.3 mm) and greater. The scanner comes equipped with four probe holders but can be mounted with a total of eight probes with optional probe holders. Mounted probes can be either phased array or conventional UT for most efficient inspections.

The major characteristic of the scanner is its capacity to bend in the center. This allows the scanner to fit on smaller pipes and also to bring the force of the spring-loaded arm in the radial direction of the pipes for better stability of the wedge, and therefore, optimum data acquisition. For the same reason, optional probe holders that are installed on the outside of the scanner can also pivot.

The HSMT-Flex also allows one of its side frames to slide. This feature allows having the probes mounted on the outside of the scanner. This provides a configuration that is well-suited for hard-to-reach places such as pipe-to-component welds.


Standard Inclusions

  • Scanner frame with handles, and:

    • Two 340 mm (13.5 in.) frame bars

    • Two 500 mm (20 in.) frame bars


  • OmniScan-compatible waterproof spring-loaded wheel encoder with 5 m cable

  • Four 90º probe holder brackets

  • 4 spring-loaded arms (SLA)

  • 4 TOFD-P/E 31.75 mm yokes

  • 2 PA 40 mm × 55 mm yokes

  • Irrigation tubing and accessories

Note: Umbilical cable, probes, and wedges are not included with the scanner.

Options

  • Umbilical

  • Remote Pulser/Preamplifier

  • Couplant-Feed Units

  • Laser Guide Kit
    Battery-operated laser-guiding device for easier weld tracking.

  • Yokes

  • TomoScan FOCUS LT Encoder Cable Adaptor

  • Replacement encoder

  • Probe holder Kits
    Set of two spring-loaded arms (SLA) mounted on 90º brackets, to allow more than four probes.

    • Standard-For pipes larger than 12 in. OD.

    • Pivoting-For pipes smaller than 12 in. OD.


  • Spare Parts Kits

    • For PV-100 applications

    • For PV-200 applications


Specifications

Length in Scan Axis
(mm)
Width
(mm)
Height
(mm)
Weight
(kg)
2634661474.4


特性:

  • Folding frame to optimize probe contact on pipes

  • 4 plastic-covered magnetic wheels hold the unit against a ferromagnetic inspection surface.

  • Compact and versatile. The provided frame bars allow size customization.

  • Can support up to 4 conventional UT or phased array probes on pipes

  • Can support up to 8 conventional UT or phased array probes on pipes bigger than 12 in. OD using optional standard probe holder kit or

  • on pipes from 4.5 in. to 12 in. OD using optional pivoting probe holder kit

  • Light aluminum frame

  • Independently positioned and spring-loaded probe holders

  • Waterproof spring-loaded encoder with 12 steps/mm resolution

  • Removable handles for lower profile

  • Eyelet for umbilical attachment

  • Integrated water manifold simplifies couplant distribution

  • Metric/US Customary unit rulers on the scanner frame for easy probe separation measurement


PDF版产品信息:

CHAIN Manual Pipe Scanner

HSMT-Flex Manual Scanner

HSMT-X03 Manual Scanner

HST-X04 Manual TOFD Scanner




手册:


HSMT-Flex Flexible Weld Scanner: User's Manual


 
网站地图 北京德宇泛美测试技术有限公司版权所有