技术应用
工业扫查器首页 > 新闻专题 > 集团新闻
  • 跟贴排行
  • 点击排行
    • 腐蚀成像解决方案
    • VersaMouse扫查器
    • Wing(翼形)扫查...
    • GLIDER(滑动)扫...
    • Chain(链式)扫...
    • HSMT-X03扫查器
    • HSMT-Flex 扫查器
    • HSMT-Compact(紧...
即时新闻
  • 精彩图片
  • 热门推荐
  • 产品展示
Chain(链式)扫查器
发布时间:2015-05-29



CHAIN(链式)扫查器

CHAIN(链式)扫查器为外径在1.75英寸到38英寸范围内的管材提供


概览:

The CHAIN™ scanner facilitates the manual inspection of pipes with outside diameters of 45 mm to 965 mm (1.75 in. to 38 in.), offering the possibility for two-axis encoding. The scanner, which is held by chain links instead of magnetic wheels, is able to inspect ferromagnetic or nonferromagnetic surfaces. The chain links also help ensure a straight displacement of the scanner by eliminating steering problems. Finally, it is useful when the area around the pipe is difficult to access as the scanner can be rotated around the pipe using the chain links.

Main applications are:

  • Circumferential-pipe weld inspections with phased array, TOFD, or conventional UT

  • Corrosion mapping of small areas with phased array or conventional UT (using XY; 2 encoder models)


Probe-positioning system with lead screw adjustment

Standard Inclusions

  • Main module with a scan-axis encoder

  • Chain links for 5 in., 16 in., or 38 in. pipe OD (depending on model) with quick-release adjustable buckle

  • 5 m encoder cable for OmniScan

  • 450 mm (17.7 in.) probe-holder bar

  • Two spring-loaded probe holders with adjustable TOFD-P/E yokes

  • Two spring-loaded probe holders with adjustable phased array yokes

  • Probe-positioning system with lead screw adjustment

  • 5 m divisible cable conduit (19 mm ID)

  • Irrigation tubes and fittings

  • CHAIN™ scanner tool

  • Carrying case

Note: Probes and wedges are not included with the scanner.

Specifications

Length in scan axis
(mm)
Width
(mm)
Height
(mm)
Weight
(kg)
11475841

Note: specifications above apply to the main module

Encoder resolution:
Circumferential (X) axis: 19.2 steps/mm
Longitudinal (Y) axis: 56.7 steps/mm

Optional packages


ChainScan-A-4Probe: Extra part package needed to perform inspections with four probes on the CHAIN scanner


ChainScan-A-mouse: Extra part package needed in order to use the CHAIN scanner as a mouse scanner with magnetic-wheel holding system instead of chain links


ChainScan-A-SBar: 20 cm probe-holder bar and lead screw kit for confined space applications

特性:


  • Standard configuration using one or two probes and optional configuration using four probes for TOFD, phased array, or pulse-echo inspections.

  • Pipe range with outside diameters from 45 mm to 965 mm (1.75 in. to 38 in.)

  • Encoded manual scan on one or two axis (depend on the model)

  • Ergonomic handle to protect encoder connectors and provide cable management

  • Independent chain links mounted on bearings wheels coated with urethane for smooth rolling

  • Easy clamping device for quick scanner positioning

  • Spring-loaded probe holders ensuring good probe contact in any scanner position or orientation

  • The majority of adjustments can be made without the use of tools

  • Compatible with the OmniScan®, the TomoScan FOCUS LT™ (with optional adaptor), and other instruments using the appropriate encoder cable

PDF版产品信息:


CHAIN Manual Pipe Scanner

HSMT-Flex Manual Scanner

HSMT-X03 Manual Scanner

HST-X04 Manual TOFD Scanner




手册:

CHAIN Scanner User's Manual


 
网站地图 北京德宇泛美测试技术有限公司版权所有